Joanne's Kinky Forum

I ordered a large E-Stim Systems E-WMCBP 2.0, but I'm not very patient. So I spend Yesterday some hours in my workshop and build this one. It will get a printed neck, but I want to find the right dimensions before i start the construction. It's hollow and welded so not very heavy. IMG_20210727_16342...

Sorry, I can not help with reaching 1500, already following on Twitter and discord.

Thx, It was my first real project on Fusion360. due to you I tried it and will use it a lot. At least for the first year. I think its only free the first year.
4 wires so I can try different combinations. Most of the time i used the outer ones on one channel and the inner ones on the other.

Interesting idea. I thought about printing a spacer that covers more of the balls and coat it with epoxi or tape part of the balls and coat the rest with epoxi, before removing the tape. Heart shrink can create a sharp edge.

I'm using a Geeetech A10M with a leveling probe but till now, even with leveling it is not good enough for parts bigger then 130x130 mm.

Very interesting, I will try it in the future maybe I don't have to scrap my bed. bigger parts have been almost impossible without a raft underneath.

First test show, that it is effective. On maximum power quite painful and can force small ejaculations. Under normal conditions quite pleasant. Maybe not yet the perfect position for prostate stimulation, but closer then my other efforts.

After testing it I think, that the contact area is to big in relation to other electrodes. Coating part of the balls might be a solution.

This is an older design recently updated. It consists of 2 stainless steel balls, one with an inner thread and the other with a through hole. A partial insulates screw is connecting the balls. To separate the balls I used a printed spacer.

This one is a test setup. After all this years I'm still searching for the perfect anal toy. I took my favorite wooden pug recreated it as a 3D print and added 4 electrodes. I intend to make some test drives next week to find out if they hit the right spots.